Slit Edge Az150g Hot Dip Gl Full Hard Hot Dipped Galvalume Steel Coil

1. Brief introduction
It is galvanized steel sheet with zinc and aluminum, and is the ideal combination of anti-corrosion and alkali-resistance of zinc, and the durability, heat-resistance, and acid-resistance of aluminum. The galvanized layer
is consisted of 55% of aluminum and 43.3% of zinc and 1.6% of silicon per weight
2. Steel coil processing
Entry end-twin decolier-cleaning-entry looper-pretreatment-pretreatment oven-prime coater-prime oven-quench unit-finish coater-finish oven-embosse-quench unit-quench unit-exit looper-shear-coiler-exit end
3. Application
1) Construction: Roofing, cladding, structural sections, composite panels
2) Electric appliance: Washing machine, refrigerators, toaster, microwave
3) Miscellaneous: Air duct, lighting, computer casing
4. Features
1) Formable, weldable and paintable
2) Superior long term corrosion resistance in the most atmospheric conditions. This is achieved
through the combination of the sacrificial protection of the zinc and barrier protection of aluminum
3) Hot dip galvalume coating out-perform galvanized coating from 2-6 times than galvanized steel
5. Packing details
Each hot dip galvalumetube wrapped by plastic film and waterproof paper, one steel strip strapping
on the galvalume steel coil circumference. 3 - 5 coils tube packed eye vertical on wood pallet, and
strongly strapped by edge protection, and at least 4 steel straps through coil eye. Coil tube packed
eye to sky on wood pallet

(1) Spangle coating of normal zinc flower coating

Zinc layer in the normal solidification process, zinc grains grow freely formed with obvious zinc flower morphology of the coating.

(2) Spangle coating of small zinc flower in Conclusion

During the solidification process of zinc layer, zinc grains are artificially restricted to form as fine zinc flower coating as possible.

(3) Zinc free flower coating spangle-free

By adjusting the chemical composition of the bath, the coating has no visible zinc flower morphology and uniform surface.

(4) Zinc-Iron alloy coating

Heat treatment of the steel strip through the zinc bath, so that the whole coating zinc and iron alloy layer, the appearance of the coating is dark gray, no metallic luster, in the process of violent molding is easy to powder, suitable for in addition to general cleaning, without further treatment can be directly painted coating.

(5) Differential coating

For both sides of galvanized steel sheet, different zinc layer weight coating is required.

(6) Skin pass

Finishing is a cold rolling process of galvanized steel with a small amount of deformation for one or more of the following purposes.

Improve the surface appearance of galvanized steel plate or suitable for decorative coating; So that the finished products do not see the processing of slip line (Luders line) or folding phenomenon temporarily reduced to the minimum.

Jiangsu Irunt Steel Group Co., Ltd. is located in Wuxi City , Jiangsu Province, China, which is the largest steel production base. After 30 years of efforts, it has grown from a family factory to a group company.

The group company mainly produces and sells a series of steel products such as steel pipe, steel coil, steel plate, copper pipe, copper plate, copper strip, aluminum pipe, aluminum plate, galvanized steel pipe, galvanized coil, galvanized plate and so on.The group company has established five platforms, including three production plants and two processing plants. At present, it is still expanding its production line, basically forming a development model of integration of production, processing and sales.

Our annual production capacity of various specifications is about 1 million metric tons. In addition to being a supplier of our series of products, the group company is also committed to expanding its commitment to customers by strengthening services and adding new facilities. A dedicated team is responsible for providing technical support, recommending the correct use of steel, and assisting customers to give full play to their products.

Over the years, we have opened up new markets in Africa, Southeast Asia, the Middle East and America. Our best service and excellent quality have led long-term partners in many countries and established continuous business relations with all customers. Our principle is "service first, sales second". Most of the time, we have comprehensive inspection and procurement to control the quality of finished products. We will have a professional inspection team to test each delivery of products.

Since its establishment, in line with the mission of "contributing high-quality products and services to the world" and the core values of "customer first, excellence, coexistence and win-win", we ensure that we can deeply cooperate with all our friends in the field of iron and steel, and win more affirmation and praise from the market and customers with its high-quality products, perfect product team and thoughtful service, I believe tomorrow will be better!