Hot Rolled Bright Surface 201 304 310 316 321 Stainless Steel Round
Bar 2mm, 3mm, 6mm Metal Rod
201 Stainless Steel
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1(Mid Copper): The carbon content is slightly higher than J4 and
the copper
content is lower than J4. Its processing performance is less
thanJ4. It is suitable for ordinary shallow drawing and deep
drawing products, such as decorative board, sanitary products,
sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes
are still good, because the hardness is high (both above 96°) and
the polishing is morebeautiful, but the square tube or the
curved tube (90°) is prone to bursting.
In terms of flat plate: due to the high hardness, the board surface
is beautiful, and the surface treatment such as frosting,
polishing and plating is acceptable. But the biggest problem is the
bending problem, the bend is easy to break, and the groove is easy
to burst. Poor extensibility.
J3(Low Copper): Suitable for decorative tubes. Simple processing
can be done on the decorative panel, but it is not possible with a
little difficulty. There is feedback that the shearing plate is
bent, and there is an inner seam after breaking (black
titanium,color plate series, sanding plate, broken, folded out with
inner seam). The sink material has been tried to bend, 90 degrees,
but it will not continue.
J4( High Copper): It is the higher end of the J series. It is
suitable for small angle types of deep drawing products. Most of
the products that require deep salt picking and salt spray test
will choose it. For example, sinks, kitchen utensils, bathroom
products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel
304 is a versatile stainless steel that is widely used to make
equipment and parts that require good overall performance
(corrosion resistance and formability). In order to maintain the
inherent corrosion resistance of stainless steel, steel must
contain more than 18% chromium and more than 8% nickel.
316 stainless steel
316 stainless steel has excellent corrosion resistance, atmospheric
corrosion resistance, and high-temperature strength due to the
addition of Mo, which can be used under harsh conditions; excellent
work hardening (non-magnetic).
Equipment for seawater use,chemical, dye, papermaking, oxalic acid,
fertilizer and other production equipment; photographs, food
industry, facilities incoastal areas, ropes, CD rods, bolts, nuts.
430 stainless steel
Type 430 Stainless Steel is perhaps the most popular non-hardenable
ferritic stainless steel available. Type 430 is known for good
corrosion, heat, oxidation resistance, and its decorative nature.It
is important to note that when well polished or buffed its
corrosion resistance increases. All welding must occur at higher
temperatures, but it is easily machined, bent, and formed.
Thanks to this combination it is used in a number of different
commercial and industrial applications including:Furnace combustion
chambers,Automotive trim and molding,Gutters and downspouts,Nitric
acid plant equipment,Oil and Gas refinery equipment,Restaurant
equipment,Dishwasher linings,Element supports and fasteners.etc.
