0.5mm~150mm Thickness Cold Drawn Small Diameter 6061 Alloy Precision Aluminum Tube/ Aluminium Pipe

The 6061 and 6063 are two types of aluminum. There are some differences.
The difference between the two mainly includes three aspects, composition, use and production technology.
6061 aluminum composition is more than 6063, hardness is stronger;
6063 is mostly used for building aluminum doors and Windows, curtain wall frame, and 6061 is mostly used for welding, processing, etc.
At the same time, the manufacturing process of 6061 is more complicated than that of 6063.
1. Different components
6063 aluminum alloy composition contains 0.4%Si and 0.7%Mg, hard material strength 295Mpa, soft material strength 111Mpa, used in tubular railings, furniture, frames, building extruded profiles.
6061 aluminum alloy consists of 0.6%Mg, 0.25%Cu, 1.0%Mg, 0.09%Cr, hard strength 316Mpa, soft strength 127Mpa, used in corrosion resistant structures, trucks, ships, vehicles, furniture and so on.
2. Different uses
6063 aluminum alloy is widely used in the framework of building aluminum doors, Windows and curtain walls. In order to ensure that doors, Windows and curtain walls have high wind pressure resistance, assembly performance, corrosion resistance and decoration performance, the requirements for the comprehensive performance of aluminum alloy profiles are far higher than the standard of industrial profiles.
6061 aluminum alloy is a high quality aluminum alloy product produced by heat treatment pre-drawing process, although its strength can not compare with 2000 series or 7000 series. However, its magnesium and silicon alloys have many characteristics, such as excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy polishing, easy coloring film, excellent oxidation effect and other excellent characteristics.
3. Different production techniques
The T6 process of 6061 is: the solution treatment temperature is 530 degrees, and the T6 state made by artificial aging is 160 degrees for plates, 175 degrees for bars and plates with thickness above 80 degrees. The T5 status of the 6063 is air-cooled and artificial aging. Small deformation coefficient, easy to control, hardness is general, T6 state is water-cooled, large deformation coefficient, not easy to control, high hardness.

Jiangsu Irunt Steel Group Co., Ltd. is located in Wuxi City , Jiangsu Province, China, which is the largest steel production base. After 30 years of efforts, it has grown from a family factory to a group company.

The group company mainly produces and sells a series of steel products such as steel pipe, steel coil, steel plate, copper pipe, copper plate, copper strip, aluminum pipe, aluminum plate, galvanized steel pipe, galvanized coil, galvanized plate and so on.The group company has established five platforms, including three production plants and two processing plants. At present, it is still expanding its production line, basically forming a development model of integration of production, processing and sales.

Our annual production capacity of various specifications is about 1 million metric tons. In addition to being a supplier of our series of products, the group company is also committed to expanding its commitment to customers by strengthening services and adding new facilities. A dedicated team is responsible for providing technical support, recommending the correct use of steel, and assisting customers to give full play to their products.

Over the years, we have opened up new markets in Africa, Southeast Asia, the Middle East and America. Our best service and excellent quality have led long-term partners in many countries and established continuous business relations with all customers. Our principle is "service first, sales second". Most of the time, we have comprehensive inspection and procurement to control the quality of finished products. We will have a professional inspection team to test each delivery of products.

Since its establishment, in line with the mission of "contributing high-quality products and services to the world" and the core values of "customer first, excellence, coexistence and win-win", we ensure that we can deeply cooperate with all our friends in the field of iron and steel, and win more affirmation and praise from the market and customers with its high-quality products, perfect product team and thoughtful service, I believe tomorrow will be better!